Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 57,943   Posts: 1,194,812   Online: 651
      
Results 1 to 2 of 2
  1. #1
    Reinhold's Avatar
    Join Date
    Aug 2003
    Location
    Washougal, Washington
    Shooter
    Multi Format
    Posts
    490

    190mm Wollaston Meniscus on a Speed Graphic Board

    I have an extra 190mm on a Speed Graphic lensboard.
    Those of you with Speed Graphics have the enviable use of a shutter with these barrel lenses.

    The lens has an edge chip that is just noticable at wide open aperture.
    It has been painted black to eliminate the possibility of flare.
    Use any aperture card with the lens and the chip in not visible
    The completed, mounted lens on the SG board was $158.
    The chipped edge qualifies you for a $20 discount.

    So... $138 + $11 USPS shipping.

    Here it is, one photo shows the 190mm lens with it's 72mm filter ring on the Speed Graphic board. ($138 + shipping).

    The other photo illustrates the lens with a filter and lenshood (not included) just to illustrate how this baby would look on your Speed Graphic camera. When my shipment arrives later this month, a yellow filter and hood would add $33 to the cost if you so desire.

    www.Re-inventedPhotoEquip.com
    Attached Thumbnails Attached Thumbnails 190,Graph+FiltRing.JPG   190,Graphic+y+hood.JPG  

  2. #2
    Reinhold's Avatar
    Join Date
    Aug 2003
    Location
    Washougal, Washington
    Shooter
    Multi Format
    Posts
    490
    If you'd like to see what others have done with this lens on a Speed Graphic...
    Look at the three 190mm photos at:
    http://re-inventedphotoequip.com/Site/Photos.html

    Reinhold



 

APUG PARTNERS EQUALLY FUNDING OUR INFRASTRUCTURE:


 
                     

Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin