Clearing out some GAS, this is my second Yashica44, this one has a slight defect at infinity the bottom left edge of the lens board doesn't fully retract so the upper right side of the image can have some out of focus area, someone just needs to bend the front board properly, I solved the issue by just holding down my finger on the board to keep it flat and it seemed to work fine. Also the viewfinder is missing it's screws (came like that believe it or not) and I just used gaffers tape to keep it in place and that worked fine. Anyway I took many fine pictures with it but I don't need two. Lens elements are beautiful, copal shutter etc. Case is in rough shape but protects the camera.
Pardon my hand but I wanted to show how bright the viewfinder is!
The blades on this are incredible and give great bokah
Shutter is clean as well
Needs a little shining
Second post with images I've taken with it. I know the body is in rough shape but the lens is really clean which is the important part, comes with a take up spool.