Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 69,878   Posts: 1,520,361   Online: 1170
      
Results 1 to 4 of 4
  1. #1

    Join Date
    Feb 2010
    Location
    Mundelein, IL
    Shooter
    35mm
    Posts
    983
    Images
    1

    Zone VI fiber print flattener/uncurler

    $35 + shipping (UPS in US should be about $15).



    In pretty good shape, couple of little cracks in the paint here and there.

    Duncan

  2. #2

    Join Date
    Feb 2005
    Location
    Richmond, VA
    Shooter
    Multi Format
    Posts
    1,066
    What are the dimensions, including longest adjustable setting?

  3. #3

    Join Date
    Feb 2010
    Location
    Mundelein, IL
    Shooter
    35mm
    Posts
    983
    Images
    1
    The deck is 11" wide though obviously the prints can hang off the edge. The distance on the deck between the bottoms of the two angled walls, when adjusted to the widest distance, is 10" SO it makes sense that I've seen it referred to as a flattener for "up to 11x14 prints" For completeness' sake, the full length of the unit in the other dimension (how much table space it needs) is 14". And I think I have it sold (I have accepted an offer, and if they follow through then it is sold.)

    Duncan

  4. #4

    Join Date
    Feb 2010
    Location
    Mundelein, IL
    Shooter
    35mm
    Posts
    983
    Images
    1
    SOLD

    Duncan



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin