Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 68,696   Posts: 1,482,509   Online: 966
      
Page 15 of 15 FirstFirst ... 59101112131415
Results 141 to 144 of 144
  1. #141
    Photo Engineer's Avatar
    Join Date
    Apr 2005
    Location
    Rochester, NY
    Shooter
    Multi Format
    Posts
    22,710
    Images
    65
    I prefer the reverse!

    PE

  2. #142

    Join Date
    May 2011
    Location
    Allentown PA area
    Shooter
    35mm
    Posts
    261
    When it comes to C41/E6 developing, just how critical is the temperature? I'm asking, because a few days ago, I bought a cheap aquarium heater, blah, blah blah...and after spending time fine tuning, I have my water bath up to 101.7 where it fluctuates between 101.6 to 101.8(F). Should I try to push the temperature up or leave it as is? This is for the unicolor kit from Freestyle, which specifies 102(F)

    Thanks

  3. #143
    Roger Cole's Avatar
    Join Date
    Jan 2011
    Location
    Suburbs of Atlanta, GA USA
    Shooter
    Multi Format
    Posts
    3,444
    Close enough in my experience, IF the solutions are that same temperature. If they're slightly below the temperature of the water bath might wan to bump it a tad, depending on how much of a tad it's bumpable, as it were.

  4. #144

    Join Date
    May 2011
    Location
    Allentown PA area
    Shooter
    35mm
    Posts
    261
    I can adjust it a little more, I'll do a test with water in the bottles first.
    Thank you.

Page 15 of 15 FirstFirst ... 59101112131415


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin