Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 69,762   Posts: 1,516,141   Online: 870
      
Results 1 to 2 of 2
  1. #1

    Join Date
    Nov 2012
    Location
    Las Cruces, NM
    Shooter
    4x5 Format
    Posts
    2

    Tetenal E6 Open-air life

    Hey all,

    I was wondering if anyone had any information on how long I can leave my mixed chemicals out in the open air. I have a jobo cpe2 and mixed up the chemicals to develop a few rolls of film 2 days ago. They have been sitting in the graduated cylinders open to the air since then. Any idea if they are still good? Should any extra developing time be needed if they are, (I have run 4 rolls with the developer x-pros)?

    Also, might be a dumb question but any foreseen problems developing regular slide film after using the chemicals for x-prossing with the added open air expossure?

    All help is welcome, I am about to try it out anyways to see but if I get a response soon it might save a couple rolls of provia Thanks!

  2. #2

    Join Date
    Nov 2012
    Location
    Las Cruces, NM
    Shooter
    4x5 Format
    Posts
    2
    Update, I used the chemicals as they were and the results were perfect neutral slides. Nice and bright. Hope this helps someone else!



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin