Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,228   Posts: 1,532,738   Online: 839
      
Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22
  1. #21
    clayne's Avatar
    Join Date
    Sep 2008
    Location
    San Francisco, CA | Kuching, MY | Jakarta, ID
    Shooter
    Multi Format
    Posts
    2,838
    Images
    57
    A pre-soak should be decent enough, the patterson tank isn't going to hold or absorb any significant heat as it's plastic. A good 5 minute pre-soeak at 38C should definitely help though.

    As far as temps go, the only "critical" temp is the dev. Just about everything after that (excluding stab) only needs to be near 38C, +/- 3-5C won't make or break bleach+fix. Stab, I just keep it out near my drying cabinet and it's usually 68C or so when I use it.
    Stop worrying about grain, resolution, sharpness, and everything else that doesn't have a damn thing to do with substance.

    http://www.flickr.com/kediwah

  2. #22

    Join Date
    Jul 2013
    Location
    Michigan
    Shooter
    Medium Format
    Posts
    134
    Nuff, I did not notice the difference, that explains why I ordered extra stabilizer because I thought the kit was wrong!
    So it looks like I am using too much concentration.
    Next time I will correct that and also leave the sab solution out of the hot bath
    Thanks for picking this up.

Page 3 of 3 FirstFirst 123


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin