Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 68,664   Posts: 1,481,682   Online: 760
      
Results 1 to 3 of 3
  1. #1
    davetravis's Avatar
    Join Date
    Dec 2004
    Location
    Castle Rock, Co.
    Shooter
    Medium Format
    Posts
    656

    Ilfochrome Color shifts in P3.5

    Bad things happen in three's!
    I just mixed my first 2 liter batch of P3.5 from the 5 liter kit. My first 4x5 test of a 20x24 has gone cyan! Density about the same, but contrast also a little weak! Ilford said this was a complete replacement for the p30 kits. Anyone else having problems switching from the 2 liter to the 5 liter kits??? I'm printing on the CPM1.M paper.
    Can't wait to see the next proplem!

  2. #2
    davetravis's Avatar
    Join Date
    Dec 2004
    Location
    Castle Rock, Co.
    Shooter
    Medium Format
    Posts
    656
    FYI -
    I found this discussion on ILFOPRO. Looks like I wasted the first mixing of my P3.5.
    Seven 4x5 tests later, Ilfoheads beware!
    http://www.ilford.com/html/us_englis...asp?FORUM_ID=9

  3. #3
    davetravis's Avatar
    Join Date
    Dec 2004
    Location
    Castle Rock, Co.
    Shooter
    Medium Format
    Posts
    656
    Success!!! I re-mixed the P3.5 using the PDF instructions, and made two great looking 20x24's on the Jobo system. I used the CPS1K, and actually like the results better than the original prints on the fiber.
    Long live Ciba!!!



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin