Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,926   Posts: 1,585,122   Online: 862
      
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11

    Join Date
    Dec 2004
    Shooter
    Multi Format
    Posts
    1,670
    Just use distilled water and leave out the Anti-Cal #3.

    The developer is the most expensive component and I therefore only mix that from scratch.

  2. #12

    Join Date
    May 2005
    Location
    Woonsocket, RI USA
    Shooter
    35mm
    Posts
    2,725
    Quote Originally Posted by game
    is it also possible to make chemicals for printing rather easily? like ra4 process?
    Yes. The site that Nick referenced has an RA-4 formula that I've used. It seems fine with fresh Fuji and Kodak paper, but it produces fogging and weak colors with some (probably old) cut-rate Konica paper I bought secondhand on eBay. (That same paper seems fine with Paterson's RA-4.) Here's another site with an RA-4 chemistry formula. I've not used this formula, though. In part I've just not gotten around to it yet, but it also requires a few chemicals that I don't have and I'm not even sure where to get them.

Page 2 of 2 FirstFirst 12


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin