Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 68,771   Posts: 1,484,299   Online: 1136
      
Results 1 to 2 of 2
  1. #1

    Join Date
    Nov 2005
    Shooter
    35mm
    Posts
    196

    Tungsten/daylight/x-processing

    What will happen if I shoot Tungsten slides in daylight then have them cross processed? Or it will be the same as daylight slides in daylight and x-processed? Thanks.

  2. #2
    jd callow's Avatar
    Join Date
    Jan 2003
    Location
    Milan
    Shooter
    Multi Format
    Posts
    8,001
    Images
    117
    depends upon the which T balanced film. 160T (EPT) will be fairly easily corrected in the darkroom and has moderate contrast (for xprocessed film), RTP will go strongly green with high contrast (like most xprocessed fuji films), EPY has higher contrast and strong blue yellow curve crossover,and the 320T by kodak (EPL?) is low contrast (for xprocessed film), big grain and easily corrected in the darkroom. There is no real significant difference because of the T balance. You will spend more effort correcting the cast's and crossover of xprocessing than filtering out or seeing the T influence.

    Pick a film rate as the box says and bracket in 1/3's 1 1/3 stop over and 2/3 under - - or there about.

    *



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin