Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,943   Posts: 1,557,656   Online: 1225
      
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Bobby Ironsights's Avatar
    Join Date
    Oct 2007
    Location
    Thunder Bay, ON, Canada
    Shooter
    35mm
    Posts
    123
    Images
    6

    Fuji crystal archive, or Kodak Supra Endura?

    Hi, I'm about to start printing colour.

    Paper is only sold in 8x10 100's and up, no 25 packs of 5x7's so I can't do what I'd usually do, which is buy one of both and test.

    I'm leaning toward the Fuji, because I respect fuji more. But it's occurred to me that it's only because the lab that prints Kodak here is Walmart, and the lab that prints fuji is blacks and doesn't suck.

    Is the more expensive kodak paper worth starting on?

    Also, I've been looking at the chems.

    Is there anything particularly wrong with the Unicolor powdered chems?

    What about the Arista RA-4 kit?

  2. #2
    Vaughn's Avatar
    Join Date
    Dec 2006
    Location
    Humboldt Co.
    Shooter
    8x10 Format
    Posts
    4,692
    Images
    40
    What film do you use?

    Scuttlebutt says Kodak film does not print well on Fuji, and Fuji film prints well on both.

    Vaughn
    At least with LF landscape, a bad day of photography can still be a good day of exercise.

  3. #3

    Join Date
    Nov 2004
    Location
    Italia
    Shooter
    Multi Format
    Posts
    4,680
    You've got a shop selling boxed Fuji paper? I think that's rare. Most shops I've seen only stocked Kodak.

    Anyways to the question.

    Make sure you're comparing apples to apples. Both Fuji and Kodak make varioius similar named papers. They always seemed fairly similar in price to me.

    Can't you get a 100 sheet box of 5x7? Kodak used to sell these.

    Blacks in Canada? Blacks is owned by Fuji.

    I like Kodak Portra paper. At the moment you'll be having enough problems that any difference in the papers will be minor. Buy a box and just use it. If the paper is fresh and not fogged that'll be good enough. Once you get the printing down you can try them out and see what you like best.

  4. #4

    Join Date
    Feb 2005
    Location
    Fort Collins, CO 80521
    Shooter
    Large Format
    Posts
    178
    Images
    11
    Hi Bobby, I have been shooting with Portra VC 160 and printing with Fuji Crystal Archive paper for years now. I have been told that the Kodak film with Kodak papers will produce better blues, but I have not notice a problem with the blues. I develop my own film and prints.

    I use Fuji's paper because it has name recognition like Cibrachrome does in the art world of fine-art prints. I have received countless questions asking if I use the Fuji papers. When I say yes I can tell it was the answer they were looking for. In fact, the Fuji Crystal Archive paper has become the benchmark all color papers for both digital and analog are tested against.

    Here are some links you may want to consider. The first link contains a discussion about printing color negative film and the other links are simply examples.

    www.apug.org/gallery/showphoto.php?photo=33432

    www.apug.org/gallery/showphoto.php?photo=33433
    www.apug.org/gallery/showphoto.php?photo=33431
    www.apug.org/gallery/showphoto.php?photo=33546
    www.apug.org/gallery/showphoto.php?photo=33619

    Good luck...

  5. #5

    Join Date
    Mar 2007
    Shooter
    Medium Format
    Posts
    123
    There seems to be a lot of anecdotal evidence that Kodak is easier to use and I would confirm that I have found better results on hard to print negs with Kodak Endura paper. However; I use 99% fuji CA and get some beautiful prints. I think reliability of supply is the question you need to address. I have loads of paper with a base fog (from age) that means nothing other than snapshots can be printed on it. This paper has been supplied by pro suppliers so you can trust nobody. Find out when the supplier bought the stock and if they can't date it, don't buy it! Fuji technical told me who they had shipped to recently and I bought from them; hence I use Fuji, no other reason. Good luck>

  6. #6
    Photo Engineer's Avatar
    Join Date
    Apr 2005
    Location
    Rochester, NY
    Shooter
    Multi Format
    Posts
    23,199
    Images
    65
    I have tested Kodak paper with Fuji and Kodak film, and have gotten excellent results. The reason this was done at Kodak Research was due to complaints that Kodak film would not work well with Fuji paper. An analysis showed that their dye set in the Fuji films and papers were a good match for each other, but the dyes in Kodak film was a poorer match for Fuji paper. We found that Kodak and Fuji films both matched the Kodak paper equally well. This is a very technical issue involving the spectrophotometric characteristics of the paper sensitizing dyes to the spectrophotometric characteristics of the film imaging dyes.

    In addition, Fuji has recently made changes to their paper which resulted in CAII paper and a new process. There have been reports that the old process works well in spite of Fuji statements, but I also have seen posts here of people complaining that Fuji paper now uses much less red filtration and in one case a person reported cyan filtration here on APUG.

    The bottom line is what pleases you. I suggest that if Fuji paper pleases you, then use Fuji film for best results. If Kodak pleases you, you should feel freer in your choice of film.

    PE

  7. #7
    Bobby Ironsights's Avatar
    Join Date
    Oct 2007
    Location
    Thunder Bay, ON, Canada
    Shooter
    35mm
    Posts
    123
    Images
    6
    Well, here's the problem PE, I don't know what pleases me, and if I get poor results from the paper, it will take FOREVER to nail it down as a hundred sheets of 8x10 colour will probably last me awhile.

    But, I guess if a guy who is "doing for colour what Ansel Adams did for black and white" says fuji is good stuff, who am I to question, mere mortal that I am?

  8. #8
    Michel Hardy-Vallée's Avatar
    Join Date
    Apr 2005
    Location
    Montréal (QC)
    Shooter
    Multi Format
    Posts
    4,351
    Images
    132
    I gotta say that the Fuji film I printed on Supra Endura did not look the same as the Frontier prints I have on Crystal Archive. I don't know if it's because of the digital intermediate, though.

    RA4 paper is actually pretty cheap compared to B&W paper, so buying a box of both Supra and CA will not tank your budget. A 100 pack of 8x10 is about 30$, cheaper for smaller formats. If you end up not liking one paper over the other, then sell it back on APUG. You'll save a few pennies at least, and make a new friend!

    But given that you're just starting, I would say: start by picking a Fuji/Fuji or a Kodak/Kodak film/paper pair. It's the safest thing you could do. At this point, it simply does not matter enough which one you use. If you like Fuji simply because of trust, then go for it. I started with Kodak just because I liked my drugstore prints better on Kodak film! Again: it does not matter right now. Making an informed choice requires, well, information! Right now, your intuition is as much as you have. Trust it, and adjust your preferences later.

    Learn how to process accurately your paper, make sure you understand properly colour balance, that you can maintain proper temperature, etc. Try to get a Kodak Color Print Viewing Filter Kit on eBay. This will help you enormously with colour balance. You should be able to achieve decent starter's knowledge with a few printing sessions.

    Then, if you haven't given up on colour printing (you never know...), a few sessions later, expose a roll each of comparable Fuji and Kodak films (eg 160S and 160NC), and print them on each paper. If you can shoot a Macbeth chart, it might help you as well. That will be a long evening, nailing 4 colour balances at once, but you'll know quite a lot after that.

    Think of us poor souls doing also B&W who have an almost infinite number of combination to choose from! With colour, your choices are much less numerous.
    Last edited by Michel Hardy-Vallée; 04-03-2008 at 06:21 PM. Click to view previous post history.
    Using film since before it was hip.


    "One of the most singular characters of the hyposulphites, is the property their solutions possess of dissolving muriate of silver and retaining it in considerable quantity in permanent solution" — Sir John Frederick William Herschel, "On the Hyposulphurous Acid and its Compounds." The Edinburgh Philosophical Journal, Vol. 1 (8 Jan. 1819): 8-29. p. 11

    My APUG Portfolio

  9. #9
    Photo Engineer's Avatar
    Join Date
    Apr 2005
    Location
    Rochester, NY
    Shooter
    Multi Format
    Posts
    23,199
    Images
    65
    Quote Originally Posted by Bobby Ironsights View Post
    Well, here's the problem PE, I don't know what pleases me, and if I get poor results from the paper, it will take FOREVER to nail it down as a hundred sheets of 8x10 colour will probably last me awhile.

    But, I guess if a guy who is "doing for colour what Ansel Adams did for black and white" says fuji is good stuff, who am I to question, mere mortal that I am?
    To answer you and Michel both, photofinishers use a different paper and printer. This changes the entire picture (pun intended). You will not be able to easily duplicate the result of a photofinishing lab.

    They are both good papers, and my tests with Kodak paper were done in the 80s as part of a color reproduction study of Ektaflex R and C and Ektacolor and Ektachrome papers. So it is old. Like me.

    Endura used to come in 5x7, 100 sheet boxes for under $20. Locally, I could get that off the shelf at RIT in their camera store. IDK about Fuji sizes and I don't know about current Kodak sizes.

    I've been lucky in my life. If I didn't like the paper or film, I fiddled with the formula and coated it the way I wanted it. I have not done that for years though, and the new technology is quite different.

    PE

  10. #10

    Join Date
    May 2005
    Location
    Woonsocket, RI USA
    Shooter
    35mm
    Posts
    2,725
    Quote Originally Posted by Bobby Ironsights View Post
    Well, here's the problem PE, I don't know what pleases me, and if I get poor results from the paper, it will take FOREVER to nail it down as a hundred sheets of 8x10 colour will probably last me awhile.
    When I first started color printing, I found that I went through my first 100-sheet box fast. The reason was that I was using a lot of paper learning how to get the color balance right. Each test took an entire 8x10 sheet, and to get the color balance right for a single print took several test sheets. (Note that the color balance usually stays fairly consistent within a roll if the entire roll is shot under similar conditions, so if you make several prints from a single roll, chances are you'll be able to use the same filtration settings for all the prints.) I now use less paper, since I've gotten better at quickly finding the correct filtration. The point, though, is that you'll probably go through that first 100-sheet box more quickly than you expect.

Page 1 of 2 12 LastLast


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin