Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,302   Posts: 1,536,190   Online: 685
      
Results 1 to 4 of 4
  1. #1

    Join Date
    May 2007
    Location
    Grand Junction, Colorado
    Shooter
    4x5 Format
    Posts
    600
    Images
    57

    Does anyone use jobo print drum for 8x10 in E6

    Hi Folks,

    A little advice please. Does anyone use a Jobo 2830 print drum to process 8x10 in E6?
    I have a cpe2 plus and have used this drum for b/w in sizes up to 11x14 with no problems, but I wonder if not having much flow on the back of the film might effect a chrome differently. I have on occasion had to re wash 8x10 tri x because of a little pink that didn't wash off completely, but after washing in a tray all was well again.
    Will I have a problem with E6 8x10's in this 2830 drum?
    I appreciate any advice anyone can give, as I would like to give it a try if it is feasible.
    regards
    Erik

  2. #2

    Join Date
    Aug 2005
    Location
    Los Alamos, NM
    Shooter
    Multi Format
    Posts
    2,051
    I usually use the 8X10 print drum for 8X10 Ektachrome. It works fine.

  3. #3

    Join Date
    Dec 2004
    Shooter
    Multi Format
    Posts
    2,146
    I have done it, without problem.
    I use a homemade insert so I can develop 2 sheets at the same time.
    My drukms are in the 43xx series though.

    G

  4. #4

    Join Date
    May 2007
    Location
    Grand Junction, Colorado
    Shooter
    4x5 Format
    Posts
    600
    Images
    57
    Thanks guys! That's what I wanted to know - time to give it a try myself
    regards
    Erik



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin