Kodak Aerochrome film

[Ektagraphic]

Hi- I was wondering if anyone is shooting Aerochrome from this guy who cuts it down to 120.....http://www.tarquinius.de/......I think I am going to give some a try while it is still around. It seem like it would be really fun. I never tried the Infrared Ektachrome. Patrick

[Alexander Ghaffari]

I use it. He is a very nice person to do business with. Remember to use a filter (typically yellow or orange), otherwise the image will be all "magentay." I rate it at EI 400 or 500 and use an orange filter (remembering to open up the proper amount of stops of light lost due to the filter factor). Store you film in a freezer and process in a prompt manner (preferably same or next day...I've noticed deterioration of image quality after 3 days from when it was shot, until processed, even when stored in a freezer).

Here are a couple shots of mine, using that exact film.

http://fc00.deviantart.net/fs49/i/20...xdghaffari.jpg

http://fc08.deviantart.net/fs49/i/20...xdghaffari.jpg

http://fc09.deviantart.net/fs44/i/20...xdghaffari.jpg

[Ektagraphic]

Thanks.

[Alexander Ghaffari]

You're welcome. Let me know, if you have any more questions about this film, I may be able to help.

[AgX]

Kodak has had lately at least three films with the designation `Aerochrome´ on offer and still has two.

The film this is about is "Aerochrome III IR 1443"

[Alexander Ghaffari]

I found this to be interesting.

http://www.kodak.com/eknec/documents.../EN_ti2562.pdf

[tiberiustibz]

C-41 Processing
This film may be processed in KODAK FLEXICOLOR
Chemicals for Process C-41. To achieve results like Process
AN-6, use a development time of 3’45” at 92°F (33.3°C)
with a basic replenishment rate of 105 mL⁄ft2. Substitute
AN-6 Developer using a developer time of 3’00” at 90°F
(32.2°C) for increased productivity

Interesting...I'll remember this if I ever try this film.

[dwdmguy]

Holy cow, I have a 125' roll of this at ISO125 that was given to my and I'm selling it. I don't know for how much so maybe I'll check this guys site.
Thanks

[dwdmguy]

The guys link does not work.

[Alex Bishop-Thorpe]

http://www.tarquinius.de/, that should do it.