Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,271   Posts: 1,534,518   Online: 1028
      
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22
  1. #11
    Bob Carnie's Avatar
    Join Date
    Apr 2004
    Location
    Toronto-Ontario
    Shooter
    Med. Format RF
    Posts
    4,651
    Images
    14
    Yes , all C41 films I saw the base was clean and not orange.
    Quote Originally Posted by michaelbsc View Post
    So if it is cross processed in E6 chemicals will the beach remove the orange mask?

  2. #12
    Thomas Bertilsson's Avatar
    Join Date
    Jan 2003
    Location
    Minnesota
    Shooter
    Multi Format
    Posts
    14,231
    Images
    295
    I never saw any of the Kodak C41 b&w films cross processed in E6, but the lab I used to work at sometimes cross processed Ilford XP2 in E6, and it took on a green tint somehow.
    That was with Kodak chemistry in a big Refrema.

    The guy processing the film wasn't too keen to do it, as he said he was worried about contamination. I haven't found any substantiated evidence that this would be the case, but when I cross process film using home kits, I always wait until the end of the kit capacity to run those rolls, just in case.

    I hope that helps a little bit.

    - Thomas
    "Often moments come looking for us". - Robert Frank

    "Make good art!" - Neil Gaiman

    "...the heart and mind are the true lens of the camera". - Yousuf Karsh

  3. #13

    Join Date
    Jul 2011
    Location
    Greenock (Scotland)
    Shooter
    35mm
    Posts
    45
    Thanks for your replies.

    I assume that i need to shoot with a red filter as well.

    Was wondering as well if i can over expose the film, instead of having pushed (would be easier for me since i shoot in a studio).

  4. #14

    Join Date
    Jul 2011
    Location
    Greenock (Scotland)
    Shooter
    35mm
    Posts
    45
    Quote Originally Posted by Thomas Bertilsson View Post
    I never saw any of the Kodak C41 b&w films cross processed in E6, but the lab I used to work at sometimes cross processed Ilford XP2 in E6, and it took on a green tint somehow.
    That was with Kodak chemistry in a big Refrema.

    The guy processing the film wasn't too keen to do it, as he said he was worried about contamination. I haven't found any substantiated evidence that this would be the case, but when I cross process film using home kits, I always wait until the end of the kit capacity to run those rolls, just in case.

    I hope that helps a little bit.

    - Thomas
    I had some XP2 flm cross-processed a few times in the past ; the result was awsome, beautiful monochrome slides. I am thinking on renewing the experience again sometime.

  5. #15
    Bob Carnie's Avatar
    Join Date
    Apr 2004
    Location
    Toronto-Ontario
    Shooter
    Med. Format RF
    Posts
    4,651
    Images
    14
    the push development is important,
    Quote Originally Posted by photoworks68 View Post
    Thanks for your replies.

    I assume that i need to shoot with a red filter as well.

    Was wondering as well if i can over expose the film, instead of having pushed (would be easier for me since i shoot in a studio).

  6. #16

    Join Date
    Jul 2011
    Location
    Greenock (Scotland)
    Shooter
    35mm
    Posts
    45
    I finally got around to do more kodak 400cn film crossed processed and I really like the results. Will post some results soon.

  7. #17

    Join Date
    Jul 2011
    Location
    Greenock (Scotland)
    Shooter
    35mm
    Posts
    45
    Here is a recent shot I took with 400 CN that was crossed process in E6. What do you guys think :

    Click image for larger version. 

Name:	Inverkip_Marina.jpg 
Views:	38 
Size:	31.1 KB 
ID:	65867


  8. #18

    Join Date
    Oct 2010
    Location
    wonderful new jersey
    Shooter
    Medium Format
    Posts
    102
    that's nice---what speed did you shoot it at?

  9. #19
    StoneNYC's Avatar
    Join Date
    Aug 2012
    Location
    Connecticut, USA
    Shooter
    8x10 Format
    Posts
    7,239
    Images
    225

    CROSS PROCESS KODAK 400 CN - advice needed

    How did you get it to be B&W?

    When I did that with some Kodak 400 CN film I got a very bad green color in the scan...

    Granted I did this about a year ago with a lot less skill and knowledge as now, but still...

    This is the straight scan...



    And this is after some finagling ...



    Obviously you scanned it as B&W or converted it after? But I had a hell of a time with the orange base...

    Or am I missing something?


    ~Stone

    Mamiya: 7 II, RZ67 Pro II / Canon: 1V, AE-1, 5DmkII / Kodak: No 1 Pocket Autographic, No 1A Pocket Autographic | Sent w/ iPhone using Tapatalk
    ~Stone | "...of course, that's just my opinion. I could be wrong." ~Dennis Miller

  10. #20

    Join Date
    Jul 2011
    Location
    Greenock (Scotland)
    Shooter
    35mm
    Posts
    45
    I exposed the film at 100 ISO and I ask the lab to cross process and push the film to 1 stop and a half.

    Here is the raw scan from the slide :

    Click image for larger version. 

Name:	Inverkip_Marina_rawscan.jpg 
Views:	19 
Size:	430.5 KB 
ID:	65901

    It was just a matter of applying a black and white layer after.
    Last edited by photoworks68; 03-17-2013 at 05:53 PM. Click to view previous post history.

Page 2 of 3 FirstFirst 123 LastLast


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin