Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,933   Posts: 1,585,482   Online: 913
      
Results 1 to 4 of 4
  1. #1

    Join Date
    Jan 2005
    Location
    Mallorca: Spain
    Shooter
    Multi Format
    Posts
    59
    Images
    40

    Values to calibrate Kentmere VC Select

    Hello everybody,

    Do someone has the values to calibrate the zonemaster II (RH Designs) with the paper Kentmere VC Select.?

    Thank you very much

  2. #2
    clogz's Avatar
    Join Date
    Dec 2002
    Location
    Rotterdam, The Netherlands
    Shooter
    Multi Format
    Posts
    2,837
    Images
    114
    Digital is best taken with a grain of silver.

  3. #3
    mikeg's Avatar
    Join Date
    Apr 2003
    Location
    Shropshire, UK
    Shooter
    35mm RF
    Posts
    570
    Images
    6
    OK, these are the values I use. They are for a Kaiser enlarger using their inbuilt colour filters set for the values specified by Kentmere for each grade. So I would use these purely as a starting point and carry out your own tests using the instructions on the rhdesigns website. I think I never did test for grade 00 so probably best to ignore that one!

    Also, I can't seem to insert a table or tabs so apologies for the formatting.

    Grade, Offset, Contrast
    00, -19, 150
    0, -19, 150
    1, -19, 130
    2, -18, 120
    3, -19, 110
    4, -34, 100
    5, -40, 90


    cheers

    Mike

  4. #4

    Join Date
    Jan 2005
    Location
    Mallorca: Spain
    Shooter
    Multi Format
    Posts
    59
    Images
    40
    Thank you for yours answers



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin