Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,465   Posts: 1,570,679   Online: 864
      
Results 1 to 3 of 3
  1. #1
    JeffD's Avatar
    Join Date
    Aug 2004
    Location
    Atlanta, GA USA
    Shooter
    4x5 Format
    Posts
    308
    Images
    10

    Cable to connect Stop Clock and a Zone Analyzer meter

    I recently received a Zone Analyzer meter to go with my Stop Clock timer, by RHDesigns.

    I now realize I need a connecting cable between the two devices. I am thinking I should be able to make one, rather than order from over seas.

    Can anyone tell me if it is just a simple pair wire with 1/8 inch plugs on the end? Looks that way.... Looks like a trip to Radio Shack is in order.

  2. #2

    Join Date
    Sep 2004
    Location
    Toulouse, France
    Shooter
    Large Format
    Posts
    527
    Hi !
    Have you contacted Richard Ross of RH Designs ?
    He will give you first hand advice ;-)
    And may be able to send a drawing for proper cabling....
    Just my 2 ¢

  3. #3

    Join Date
    Aug 2004
    Shooter
    35mm
    Posts
    2

    Linking StopClock and Zone Analyser

    Hi,

    Dr Ross informs me, when I was linking the two:

    It is a standard 3.5mm stereo jack-jack lead

    You can just make it up yourself, or RH Designs is very helpful.

    Have fun,
    Craig



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin