Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 68,768   Posts: 1,484,187   Online: 826
      
Results 1 to 3 of 3

Thread: filters

  1. #1

    Join Date
    Apr 2006
    Shooter
    4x5 Format
    Posts
    211

    filters

    hi all
    just a small question. when you replace the head on a mxt with a cold light you lose the filterdrawer so wher then is the best place to put the filters? above below , on top of neg carrier?
    thanks
    mitch

  2. #2

    Join Date
    Apr 2004
    Location
    Montgomery, Il/USA
    Shooter
    Multi Format
    Posts
    4,837
    wager123,
    I fabricated one from masonite(1/8") and put it between the head and neg stage. I use an old gel holder from a Norman light to hold the VC filters.

    Basically it's three layers of hardboard with the center one being sandwiched between the top & bottom which are cut out using a fly cutter.
    Rotozip or router would also work
    Heavily sedated for your protection.

  3. #3
    RalphLambrecht's Avatar
    Join Date
    Sep 2003
    Location
    the villages .centralflorida,USA and Germany
    Shooter
    Multi Format
    Posts
    6,154
    Images
    1
    Just a question. Why did you replace the head with a cold-light?
    Regards

    Ralph W. Lambrecht
    www.darkroomagic.comrorrlambrec@ymail.com[/URL]
    www.waybeyondmonochrome.com



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin