Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 75,742   Posts: 1,670,464   Online: 628
Page 2 of 2 FirstFirst 12
Results 11 to 11 of 11
  1. #11

    Join Date
    Nov 2007
    Plastic Cameras
    And here is a blurry photo(only got a digi camera in my phone) of my femoneg showing the location of the pins pins.

    Attachment 10599

    the red circles show where the pins go when its closed. If you put the leader over the pins and then close the femoneg and push down from above the pins, it punches the leader onto the pins. You then open the carrier, put film in its normal position and apply non stretch adhesive tape to stick the film to the leader. You can then do the same for your neg so its sits above the film to make your mask. Then when printing you swap the mask so its above the film.
    Last edited by rob champagne; 08-11-2008 at 03:04 PM. Click to view previous post history.

Page 2 of 2 FirstFirst 12



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin