Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 69,760   Posts: 1,516,060   Online: 840
      
Results 1 to 3 of 3
  1. #1

    Join Date
    Mar 2006
    Location
    Minnesota, USA
    Shooter
    Medium Format
    Posts
    263
    Images
    37

    Mounting a 135mm Componon-S

    I recently purchased a second 135 Componon-s to set up a second enlarger. The first one I had came on a lens board already mounted (Beseler 45MXT) using the heavy collar with the set screw. The second one came mounted with a small ring and the heavy collar below the lens board. Is one way right and the other wrong. It seems using the heavy collar as a retaining ring, the rear lens cell cannot screw down completely. That being said, it has been printing just fine.

    Anyone want to offer an explanation? I might just call Schneider.

  2. #2

    Join Date
    May 2003
    Location
    Valley Stream, NY
    Shooter
    Multi Format
    Posts
    3,216
    You need a retaining ring.
    Frank Schifano

  3. #3

    Join Date
    Jun 2007
    Location
    Utah
    Shooter
    4x5 Format
    Posts
    30
    You can buy the generic retaining ring from Adorama. Check the specs at Schneider (I think that's where I found them) for the correct size.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin