Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,531   Posts: 1,572,567   Online: 1181
      
Results 1 to 2 of 2
  1. #1
    Adri van Loenhout's Avatar
    Join Date
    Dec 2004
    Location
    Hoeven, Holland
    Shooter
    Medium Format
    Posts
    62
    Images
    4

    Use Durst M601 with CLS66

    I recently used the above combination for my prints. Now I have in my Ilford Multigrade paper an overview of the settings for the different levels (divided into 1/2-units). It is indicated for Durst (max 170) and Durst (max 130). The settings of my CLS66 will not be higher than 100 for each channel. Is this a date type? Can someone help me with the gradation settings for this CLS-head? Or I might assume a conversion percentage of the numbers in the table of 170 or 130?
    Adri

  2. #2
    ic-racer's Avatar
    Join Date
    Feb 2007
    Location
    Midwest USA
    Shooter
    Multi Format
    Posts
    6,352
    I'd try the "130" table and see how it works as-is. For '00' and '5' use your 100 instead of 130, and there may be some exposure shift with the two extreme values, but the middle range may work out OK.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin