Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,000   Posts: 1,524,365   Online: 845
      
Results 1 to 4 of 4
  1. #1
    Ino
    Ino is offline

    Join Date
    Sep 2010
    Shooter
    35mm
    Posts
    2

    Modifying black edge

    Hy guys !

    My first post here I was always wondering how to get those uneven edges. I use Durst M601 with glass carrier...thank you for your help ! ! !

    Cheers from Zagreb !

    Ino



    Uploaded with ImageShack.us




    Uploaded with ImageShack.us

  2. #2
    ann
    ann is online now

    Join Date
    Sep 2002
    Shooter
    35mm
    Posts
    2,862
    Images
    26
    a glass carrier is going to need some sort of masking paper.

    with non-glass carrier, it is just a matter of filing out the edges, carefully of course and not too deep
    http://www.aclancyphotography.com

  3. #3
    Ino
    Ino is offline

    Join Date
    Sep 2010
    Shooter
    35mm
    Posts
    2
    I am afraid of paper hairs on edges, where should I place the paper in the middle or under the glass carrier ?

  4. #4
    rjbuzzclick's Avatar
    Join Date
    Jan 2010
    Location
    Minneapolis
    Shooter
    Multi Format
    Posts
    256
    I get this when contact printing 4x5 negatives using a rough cut cardboard frame that's slightly larger than my negative, but masks the rest of the 5x7 paper. There's a few examples on my flickr page. I've not attempted this with an enlarger yet but hope to soon.
    Reid

    http://www.flickr.com/photos/rjbuzzclick/

    "If I had a nickel for every time I had to replace a camera battery, I'd be able to get the #@%&$ battery cover off!" -Me



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin