Here an image I processed today. I am not sure why it fogged on the side. also some of the image appears to turn to a more of a light tan. In the image on here I know i missed a bit with my pouring. This was the only one I poured so poorly but it had the best exposure out of the images i made. I have my ideas as to why but I am not sure maybe someone can give me their advice or ideas.
could the tannish area with no detail be over exposed or burnt out. I noticed on some of the other pates there are areas that seem ok or much better anyway but on the same plate have this tan kind of stuff it actually looks like the plate when it comes out of the silver bath but more tan.