Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,549   Posts: 1,544,658   Online: 799
      
Results 1 to 1 of 1
  1. #1
    Mustafa Umut Sarac's Avatar
    Join Date
    Oct 2006
    Location
    İstanbul - Türkiye
    Shooter
    35mm RF
    Posts
    3,840
    Images
    108

    Print as Carbon Relief with Heated Polyurethane

    There are hobby inks which applied with a brush on to your textile and when you iron it after dried , it would pop up like carbon. That came to my mind instantly. How can anyone use that advantage ?

    ps. There are ten thousand of pu formulas out there and good quality comes 4 dollar per liter. There is transparent ones also. Polyurethane foams can be raw surfaced to metal sheen and flatness.

    All the car interiors are covered with pu foam generatives. From the vitesse stick to textiles to dashboard.

    I cant imagine a analog way now but inkjet and calibrating the flow to degree of pop up is looks promising.

    What would be the color of ink or inks ? Semitransparent looks promising but I did not see a carbon print yet.

    May be a heat iron or may be microwave oven completes it.

    Mustafa Umut Sarac
    Istanbul
    Last edited by Mustafa Umut Sarac; 01-17-2014 at 07:28 PM. Click to view previous post history.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin