Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 72,551   Posts: 1,599,137   Online: 1137
      
Page 3 of 3 FirstFirst 123
Results 21 to 23 of 23
  1. #21
    Kerik's Avatar
    Join Date
    Nov 2002
    Location
    California
    Shooter
    Medium Format
    Posts
    1,467
    Images
    238
    I've also used a DaVince wash brush, which works pretty well and is somewhat less expensive then the MB, but the MB is still my main axe.
    Kerik Kouklis
    Platinum/Gum/Collodion
    www.kerik.com
    2014 Workshop Schedule Online

  2. #22
    Eric Jones's Avatar
    Join Date
    Oct 2004
    Location
    Los Angeles
    Shooter
    Multi Format
    Posts
    124
    Images
    16
    What width brush do you guys recommend for coating 4x5 and 8x10 prints?

  3. #23
    TheFlyingCamera's Avatar
    Join Date
    May 2005
    Location
    Washington DC
    Shooter
    Large Format
    Posts
    8,591
    Blog Entries
    51
    Images
    439
    for 4x5/5x7, you want a 1" brush. For 8x10 and larger, at least a 2". If you are doing 7x17 or 8x20 or larger, try to find a 3". Not a lot of places carry the 3" or 4" version, and they are PRICEY. The 2" and 1" are common and not so pricey.

Page 3 of 3 FirstFirst 123


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin