Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,553   Posts: 1,544,975   Online: 742
      
Results 1 to 2 of 2
  1. #1

    Join Date
    Jun 2004
    Shooter
    Multi Format
    Posts
    27

    Help for Aristo Cold Light Head D2 HI V54

    Here is my trouble

    :I have an Aristo D2 HI V54 220V cold light head on my VXL45 Beseler.
    As I start a printing session saturday, the head did not light on...

    I open it and found that one of the white soldered cord was disconnected.

    Looking carefully to the head connexions, I guess I have located the solder spot, but without an electric diagram I could not confirm it.
    The uploaded picture shows the disconnected cord (red arrow) and the possible solder spot (red circle).

    Could somebody help me?
    Thank you

    Jean-Bernard
    Attached Thumbnails Attached Thumbnails aristo1.jpg  

  2. #2
    largeformat pat's Avatar
    Join Date
    Jan 2008
    Location
    Upper Hunter NSW Australia
    Shooter
    8x10 Format
    Posts
    286
    Images
    6
    Hi,
    Have a look here, they have a great source of info. Have a look at the bulb replacement section, seem to remember something there.

    http://www.light-sources.com/special...aristo-archive
    What grain............................................. ...............
    Oh sorry, I forgot you don't shoot Large Format
    Large format Pat.

    http://www.largeformatpat.com



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin