Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,291   Posts: 1,535,419   Online: 788
      
Results 1 to 2 of 2
  1. #1
    Christopher Nisperos's Avatar
    Join Date
    Oct 2004
    Shooter
    Multi Format
    Posts
    380

    Jobo ATL-3000 plumbing question

    I've already read the installation instructions for the Jobo ATL-3000, but I just can't figure out the following: If the Jobo ATL-3000 (floor model, not the table top version), requires:

    • one, single cold water output (one faucet) only
    • individual hot AND cold water faucets (total, two faucets)
    • an individual cold water faucet and a mixing "Hot/Cold" faucet (total, two faucets


    Can any of you please help me on this? I need the information rather quickly, so you're welcome to email me directly or pm me.

    Kind thanks,

    Christopher

  2. #2

    Join Date
    May 2011
    Location
    MA, USA
    Shooter
    Large Format
    Posts
    1,243
    Images
    19
    as far as i remember you will need one cold water inlet, and one hot water inlet. the hot water inlet, can be a mixed hot\cold with a mixing valve.
    CatLABS of JP
    Darkroom resources and service

    www.catlabs.info | https://www.facebook.com/CatLABS.of.JP | www.jobo-usa.com



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin