Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,514   Posts: 1,543,630   Online: 1120
      
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11

    Join Date
    Nov 2013
    Shooter
    35mm
    Posts
    6
    Now I see!

    My bellows has come unglued from the felt ring holder, I just didn't see that it was a separate part.

    Now to go back through to find the best adhesive recommendations!

    I really do appreciate all the help.

  2. #12

    Join Date
    Dec 2009
    Location
    Monroe, NY USA
    Shooter
    Medium Format
    Posts
    67
    I used 3M double-sided Super Strong Automotive Attachment Tape, 1/2" wide x 5 ft., available at an automotive supply store for $8-9, 3 years ago for this. It's easy to do, has held very well, and shows no signs of separating. I do prints from 35mm and 645 negatives so I move the upper bellows up and down regularly and there has been no problem. This roll of tape is twice as much as you need. I looked for the black version but they only had the brown/beige and it was fine because when you join the bellows to the metal plate there is really no thickness to the tape.

Page 2 of 2 FirstFirst 12


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin