Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,822   Posts: 1,581,882   Online: 1152
      
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 34
  1. #21

    Join Date
    Jan 2008
    Shooter
    Med. Format RF
    Posts
    114
    Quote Originally Posted by miha View Post
    Push it firmly into the centre opening of the tunel, open the water tap carefully, water flows out trough the openings in the tank lid. Now close the little hole on the transparent tube with your finger, this will close the air intake, the water will rise in the tube. Adjust the water flow with the tap so that the water level is steady between the two red lines on the tube, then unblock the air intake again.
    So is it correct that the tank lid does NOT have to be loosened for using the cascade?

    regards,
    Stefan

    Verstuurd van mijn GT-P7510 met Tapatalk

  2. #22

    Join Date
    Feb 2007
    Location
    Slovenia
    Shooter
    Multi Format
    Posts
    858
    Images
    9
    Correct, the lid stays closed.

  3. #23

    Join Date
    Jan 2008
    Shooter
    Med. Format RF
    Posts
    114
    Quote Originally Posted by miha View Post
    Correct, the lid stays closed.
    Thank you! That's how I used it for quite some time, but was told otherwise recently, so I had to ask.

    regards,
    Stefan

    Verstuurd van mijn GT-P7510 met Tapatalk

  4. #24
    RalphLambrecht's Avatar
    Join Date
    Sep 2003
    Location
    Central florida,USA
    Shooter
    Multi Format
    Posts
    6,794
    Images
    1
    Quote Originally Posted by adelorenzo View Post
    I just picked up one of these. Seems like a simple device but I can't find any instructions online.

    If I had to guess I would say that you pop the lid of the tank but leave it on loosely, then insert the washer. So the water flows down the column and then back up and out the sides of the tank.

    Can anyone confirm or correct?
    any hose ,fitting the top hole in the lid will work just fine.film washing does not require a forced water stream. slowly running water is sufficient.
    Regards

    Ralph W. Lambrecht
    www.darkroomagic.comrorrlambrec@ymail.com[/URL]
    www.waybeyondmonochrome.com

  5. #25
    Sirius Glass's Avatar
    Join Date
    Jan 2007
    Location
    Southern California
    Shooter
    Multi Format
    Posts
    13,810
    I just repeated pour water into the tank, let it turn for 30 seconds, and empty the tank using the lift.
    Warning!! Handling a Hasselblad can be harmful to your financial well being!

    Nothing beats a great piece of glass!

    I leave the digital work for the urologists and proctologists.

  6. #26
    Photo Engineer's Avatar
    Join Date
    Apr 2005
    Location
    Rochester, NY
    Shooter
    Multi Format
    Posts
    23,527
    Images
    65
    Using this method is not the most efficient method of wash.

    I tested it out and the chemistry is removed slowly this way. I think that stuff is caught in the lift inlet or something. But my tests do show more carryover this way than by removing the tank and washing with a hose or using a tray for prints.

    PE

  7. #27
    RalphLambrecht's Avatar
    Join Date
    Sep 2003
    Location
    Central florida,USA
    Shooter
    Multi Format
    Posts
    6,794
    Images
    1
    Quote Originally Posted by Photo Engineer View Post
    Using this method is not the most efficient method of wash.

    not to mention laborious.

    PE
    Quote Originally Posted by Photo Engineer View Post
    Using this method is not the most efficient method of wash.

    I tested it too.It only worksif done repeadiatelyfor 6 to 10 times. sticking a hose into a tankis far easier

    PE
    Regards

    Ralph W. Lambrecht
    www.darkroomagic.comrorrlambrec@ymail.com[/URL]
    www.waybeyondmonochrome.com

  8. #28
    Sirius Glass's Avatar
    Join Date
    Jan 2007
    Location
    Southern California
    Shooter
    Multi Format
    Posts
    13,810
    Quote Originally Posted by Photo Engineer View Post
    Quote Originally Posted by Sirius Glass View Post
    I just repeated pour water into the tank, let it turn for 30 seconds, and empty the tank using the lift.
    Using this method is not the most efficient method of wash.

    I tested it out and the chemistry is removed slowly this way. I think that stuff is caught in the lift inlet or something. But my tests do show more carryover this way than by removing the tank and washing with a hose or using a tray for prints.

    PE
    I repeat the process many times.
    Time efficient no.
    Water efficient yes.
    Easier is not always better. Water resources have to be conserved in the southwest US. I rather spend the time than waste water.
    Warning!! Handling a Hasselblad can be harmful to your financial well being!

    Nothing beats a great piece of glass!

    I leave the digital work for the urologists and proctologists.

  9. #29
    AgX
    AgX is online now

    Join Date
    Apr 2007
    Location
    Germany
    Shooter
    Multi Format
    Posts
    9,036
    The Jobo Cascade takes about 3L/min .
    Jobo advises to use it for 5min, that makes 15L .
    Last edited by AgX; 12-29-2013 at 12:05 PM. Click to view previous post history.

  10. #30
    RalphLambrecht's Avatar
    Join Date
    Sep 2003
    Location
    Central florida,USA
    Shooter
    Multi Format
    Posts
    6,794
    Images
    1
    Quote Originally Posted by Sirius Glass View Post
    I repeat the process many times.
    Time efficient no.
    Water efficient yes.
    Easier is not always better. Water resources have to be conserved in the southwest US. I rather spend the time than waste water.
    you cannoyt waste water.it recycles automatically with the weather.if ya serious, stop flushing the toilet and don't take showers or wash the car:and while ya at it;stop breathing too CO2;rememberlaugh:
    Regards

    Ralph W. Lambrecht
    www.darkroomagic.comrorrlambrec@ymail.com[/URL]
    www.waybeyondmonochrome.com

Page 3 of 4 FirstFirst 1234 LastLast


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin