Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 68,720   Posts: 1,483,138   Online: 1256
      
Results 1 to 4 of 4
  1. #1

    Join Date
    Oct 2002
    Location
    Fresno CA
    Posts
    70
    I pulled my Omega B22 XL out of storage. Could use some help with the condensers.

    I have two condensers and a seperation ring. Is this all there is? Is there an aux condenser?

    Thanks for the help!
    Chazz


  2. #2
    lee
    lee is offline
    lee's Avatar
    Join Date
    Nov 2002
    Location
    Fort Worth TX
    Shooter
    8x10 Format
    Posts
    2,913
    Images
    8
    that is all there needs to be. I have seen a smaller aux condenser but I don't think you need it. The condenders need to be separated by the metal ring and they need to be installed in the housing so that each piece of glass has the flat side either up or down. Be really careful as you don't want to chip them. They need to be clean.

    lee

  3. #3

    Join Date
    Jan 2003
    Posts
    20
    The aux condensor is for use with 35mm, take it out when printing 6x6.

  4. #4

    Join Date
    Jan 2003
    Posts
    20



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin