Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,585   Posts: 1,545,811   Online: 1119
      
Results 1 to 3 of 3
  1. #1
    nsurit's Avatar
    Join Date
    Jan 2005
    Location
    Texas Hill Country
    Shooter
    Multi Format
    Posts
    1,268
    Images
    17

    What size inlet & outlet for Zone VI washer

    I have an 11 X 14 Zone VI archival washer which has lost its inlet and outlet elbows. The threaded part on the inlet is 3/8" and the dischage threaded part is 1". Can anyone tell me what size the original hose barb was on these fittings. I guess the other question might be, "Does it really matter." Thank you, Bill Barber

  2. #2

    Join Date
    Dec 2004
    Location
    New Mexico
    Shooter
    Multi Format
    Posts
    98
    Bill,

    I just measured the fittings on my washer. The inlet hose barb is 3/8" and the outlet barb is 1". It really doesn't matter though, as long as they are large enough to allow sufficient flow in and out.

  3. #3
    nsurit's Avatar
    Join Date
    Jan 2005
    Location
    Texas Hill Country
    Shooter
    Multi Format
    Posts
    1,268
    Images
    17
    Allen, thank you for your reply. Finding a nylon 1" elbow with a 1" barb is difficult to say the least. The 3/8" is a little easier, if you need 10 of them. Anyone have any specific ideas about "getting places?" Bill Barber



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin