Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,928   Posts: 1,585,216   Online: 766
      
Results 1 to 7 of 7
  1. #1
    nsurit's Avatar
    Join Date
    Jan 2005
    Location
    Texas Hill Country
    Shooter
    Multi Format
    Posts
    1,332
    Images
    18

    Kaiser Electric Timer 4030/4031 problem

    I've connected a Durst 305 enlarger to a Kaiser Electric Timer 4030/4031 both items of which are 220V. It is being run through a 110 to 220 converter. Using the timer on for focusing everything works great, however when I dial in a time for an exposure and push the timer button, the light comes on and stays on. Any suggestions as to what the problem might be. User error is certainly a possibility and I'm hoping for an easy fix. Bill Barber

  2. #2
    Mike Wilde's Avatar
    Join Date
    Aug 2006
    Location
    Misissauaga Canada
    Shooter
    Multi Format
    Posts
    2,939
    Images
    29

    not a user, but a thought

    Silverprint's web site shows the timer, and mentions that there is a focus footswitch that can be used with the unit.

    There isn't a switch you need to set if there is no footswitch connected?

  3. #3
    nsurit's Avatar
    Join Date
    Jan 2005
    Location
    Texas Hill Country
    Shooter
    Multi Format
    Posts
    1,332
    Images
    18
    There is no foot switch attached to this timer. Bill Barber

  4. #4
    Mike Wilde's Avatar
    Join Date
    Aug 2006
    Location
    Misissauaga Canada
    Shooter
    Multi Format
    Posts
    2,939
    Images
    29

    sorry you are so far away

    I usally can troubleshoot these things when i can lay my hands on them. Tinkerer and electrical engineer...

    The phrase voltage convertor makes me suspicious. Not all convertors are created equal. If it is heavy, and magnetic based, then likely it is good. Little power switching semiconductor things are a different story, particularly wehn lightly loaded, as this application could present.

    Will the timer run without the enlarger plugged into it?

    Is it possible to source a different lamp with the same color temp and form factor for the enlarger? Is the existing bulb 220V , or is there a step down transformer?

    A lot of european technical stuff was made dual voltage, ready to be used all over the world with the change of a few internal jumpers. Usually this involves connecting the two primary windings of the transformer in parallel for 120V, whereas in 220V they are wired in series. Mind the polarity. The two windings have to add magnetically, and not cancel one another once paralled. This may be beyond your ability. I have cut over a slide projector, and a color analyser to 110V this way.

  5. #5
    nsurit's Avatar
    Join Date
    Jan 2005
    Location
    Texas Hill Country
    Shooter
    Multi Format
    Posts
    1,332
    Images
    18
    With the enlarger not attached it does not seem to move, if in fact it is supposed to move. Bill Barber

  6. #6
    Mike Wilde's Avatar
    Join Date
    Aug 2006
    Location
    Misissauaga Canada
    Shooter
    Multi Format
    Posts
    2,939
    Images
    29

    Time for the old faithful

    Put a cheapo 110V Gralab 300 upstream of the voltage convertor. Declare the other timer dead.

  7. #7
    nsurit's Avatar
    Join Date
    Jan 2005
    Location
    Texas Hill Country
    Shooter
    Multi Format
    Posts
    1,332
    Images
    18
    Oh, so timer plugged into wall socket, voltage converter plugged into timer, enlarger plugged into the converter. Thank you, I'll give it a try. I was not thinking outside the box and I do have an extra timer to test it with. Bill Barber



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin