Omega Concept 6 Enlarger/standalone CS-50
Okay, I posted a question in Enlarging about the Omega CS-50 Auto Exposure Controller and received no response.
I understand this Controller is also an integral part of the Omega Concept 6 enlarger so if there are any past/present Omega Concept 6 owners out there I would appreciate you jumping in here.
I am asking about the paper calibration procedure. This seems to be a pretty handy tool and while I am close to getting it working properly, I need to know the proper procedure rather than flying by the seat of my pants.
Yes, as a last resort I can find a manual on fleabay for about $20 but I want to do that as a last ditch effort. It's got to be a simple procedure.