Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,445   Posts: 1,569,894   Online: 1157
      
Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20
  1. #11

    Join Date
    Jul 2009
    Location
    Sheffield, UK
    Shooter
    Multi Format
    Posts
    68
    Hey,

    I've been hacking my old reel with a dremel for the last half hour, I can now fit a strip of scrap film cut to the 9.3mm size into the reel easily, and it seems to be ok. Any tips to avoid the uneven development?

    I have used this reel for 16mm, where the flange of the spiral also covers the frames slightly, this seems to cause no ill effects, so im wondering if I'd be ok just using it as-is...
    Currently shooting: KMZ Horizont and Minox B

  2. #12
    ic-racer's Avatar
    Join Date
    Feb 2007
    Location
    Midwest USA
    Shooter
    Multi Format
    Posts
    6,342
    I'd run some film and see how it goes.

    To ensure 100% perfect results I wound up with a rather complicated scheme.
    In the dark I punch a hole in the end of the film
    Through this hole I thread a small cable-tie
    The locking mechanism on the cable tie is defeated for re-use
    The end of the cable tie is split like a snake's tongue
    I thread the other end of the film onto the spiral and feed it all the way to the hub.
    I then wedge the snake's tonge between the spirals to catch on the radial supports of the reel.
    This keeps pressure on the film to keep it pushed into the spiral, thus keeping the film pressed against the outer spiral and keeping the emulsion away from the inner spiral.
    I have done about 40 rolls this way (2 reels at a time; 72 exposures, per development run). Somewhat tedious, but near perfect development each time on a Jobo CPP2.

  3. #13

    Join Date
    Jul 2009
    Location
    Sheffield, UK
    Shooter
    Multi Format
    Posts
    68
    That sounds fairly straight forward, although I might try winding the film back on its self using a dowel, I recon if i take the curl our of the film, thread it right to the end as you say, and then jam something in the reel as you say. I think a small scrap of film folded up a few times should work...
    Currently shooting: KMZ Horizont and Minox B

  4. #14

    Join Date
    Apr 2008
    Shooter
    35mm
    Posts
    1,599
    I've used Minox quite a lot in the past, and it can be very fiddly. The Minox tank, or the Nikor or Kindermann stainless steel reels made for the size, are, IMHO, a worthwhile investment if you are likely to want to develop more films in future. They were quite expensive and even collectable at one time, but prices seem to have fallen lately ( loss of interest in the format?) and they can sometimes be picked up on Ebay with a little patience.

  5. #15

    Join Date
    Jul 2009
    Location
    Sheffield, UK
    Shooter
    Multi Format
    Posts
    68
    I think I will quite possibly end up getting the metal reels/minox tank. But for now, cash is a bit tight, and I recon I can get this to work. I'm quite handy with the old dremel!
    Currently shooting: KMZ Horizont and Minox B

  6. #16

    Join Date
    Jul 2009
    Location
    Sheffield, UK
    Shooter
    Multi Format
    Posts
    68
    The reel seems to have worked very well, Had a little bit of trouble getting the film in there, but it went in eventually. From looking at the negs, the development is nice and even, but I'll have to wait til later so i can scan to confirm this.

    Thanks for all the help everyone!

    Rob
    Currently shooting: KMZ Horizont and Minox B

  7. #17

    Join Date
    Jun 2009
    Shooter
    35mm
    Posts
    237
    I haven't tried this yet, but I've heard of people cutting the plastic out of the center of a 2-liter soda bottle and then forming it into a strip of plastic the width of either 35mm or 120 film. They then slip the plastic into one of their existing 35mm or 120 tank reels to form a cylinder. They then tape the Minox 8x11 film around the outside of the plastic cylinder in a helical spiral. The nice thing about this technique is it allows you to use your existing Jobo/Paterson tank without having to chop up a reel and does not effect the liquid loading and unloading flow patterns. The downside would be using much more chemical than a Minox tank, which only needs just over 50 ml of chemical. IIRC, the juice can folks that Anscojohn talked about trim the can in such a way as to fit it in the tank with no reel in such a way that the slope of the top holds it into the center. If you go with this approach make sure that the juice can allows the developer to enter and circulate freely just as if you were using a reel.

    Denis K

  8. #18

    Join Date
    Jul 2009
    Location
    Sheffield, UK
    Shooter
    Multi Format
    Posts
    68
    I did consider the juice bottle idea, but hacking the reel was pretty easy really. In fact it was much easier than I thought it would be. The negs and scans seem pretty good and i can dev a roll with only 200ml of chems.

    Results can be seen here. There all shot on Minopan 25 (Agfapan?) and developed in perceptol 1+3.

    Tell me what you think...

    Rob
    Currently shooting: KMZ Horizont and Minox B

  9. #19

    Join Date
    Jun 2009
    Shooter
    35mm
    Posts
    237
    Rob,

    These are excellent Minox 8x11 pictures. Your composition is frankly some of the best online examples of what an Minox 8x11 format camera can produce. Are these all handheld?

    For those who know what it takes to compose a Minox B photograph, your composition on 001 () is simply superb and 008 (the ferris wheel) is incredible.

    Denis K
    Last edited by Denis K; 11-15-2009 at 05:39 PM. Click to view previous post history.

  10. #20

    Join Date
    Jul 2009
    Location
    Sheffield, UK
    Shooter
    Multi Format
    Posts
    68
    Thanks a lot Denis, I'm really flattered

    They were all taken handheld, as I have no idea how I would use a tripod (theres some sort of adaptor that goes in the bayonet for the chain?). I find the finder fairly easy to use, and not anywhere near as squinty as I thought it would be. I guess all those years of using Russian cams with crude VF optics has me well trained!

    I'm pretty pleased with them seeing as this is the first roll I've put though the camera. I've got another 2 in the freezer that need souping, they've been building them up while I've been sorting out how to develop them. So theres more to come

    Rob
    Currently shooting: KMZ Horizont and Minox B

Page 2 of 2 FirstFirst 12


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin