Switch to English Language Passer en langue franšaise Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,271   Posts: 1,534,483   Online: 1135
      
Results 1 to 6 of 6
  1. #1
    eddie's Avatar
    Join Date
    Jul 2005
    Location
    Northern Virginia
    Shooter
    Multi Format
    Posts
    1,414
    Images
    207

    Jobo with 1 water hookup?

    Temporarily, I'm down to one faucet in the darkroom. Is it possible to run my Jobo this way? It's only for B&W processing, and I can regulate the temperature.

  2. #2

    Join Date
    Jun 2004
    Shooter
    Medium Format
    Posts
    396
    Which Jobo???

  3. #3
    eddie's Avatar
    Join Date
    Jul 2005
    Location
    Northern Virginia
    Shooter
    Multi Format
    Posts
    1,414
    Images
    207
    I have an ATL2 and a CPP2. Whichever one would work best.

  4. #4

    Join Date
    Feb 2009
    Location
    London UK
    Shooter
    Medium Format
    Posts
    178
    The ATL-2 would work as long as you don't program a rinse....Just Dev, Stop and Fix steps...Then wash external.

    Cheers Dave

  5. #5

    Join Date
    Jun 2004
    Location
    Portland, OR
    Shooter
    4x5 Format
    Posts
    3,268
    Just fill the CPP with water and it will temper it for you. Adjust your water temp for rinses and that's all you need.
    Kirk

    For up from the ashes, up from the ashes, grow the roses of success!

  6. #6

    Join Date
    Jun 2004
    Shooter
    Medium Format
    Posts
    396
    Yes, with the CPP you have to adjust any rinse water temp yourself anyhow as the water inlet is only for cold water if you need to cool the whole process down. With the ATL you just have to set the temp ever so slightly below the intended process temp (e.g. 23.5C for 24C process temp).

    //Bj÷rn



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  Ś   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin