Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,938   Posts: 1,557,371   Online: 999
      
Results 1 to 2 of 2

Thread: Filmdensities?

  1. #1
    naaldvoerder's Avatar
    Join Date
    Apr 2004
    Shooter
    35mm
    Posts
    588
    Images
    26
    Hi Apugies,

    I,m having trouble with me filmdevelopment. Can anyone of you tell me what densities a negative should have in detailed black and detailed white to be comfortably printed on grade 2-2,5? I do have a gadged to measure densities, so i hope this would aid my development, for instance by taking 3 frames of a gray card 1 two stops over and 1 two stops under on everyexposed film and adjusting development till i get the right densities, (if i knew what they were)

    Isa this a sound plan? Any comment appreciated!

    JJ

  2. #2

    Join Date
    Dec 2002
    Shooter
    Large Format
    Posts
    6,242
    Typically the test that one does to determine exposure is to measure at what density exposure breaks the film threshold. That is normally a measurement of .10 above film base plus fog. That would correspond to an exposure four stops less then meter reading. The corresponding highlight density will depend on the enlarger light source. Typically that is quoted as a Zone VIII value. That would be three stops above meter reading for a uniformly light textureless surface. The value for this is typically valued at 1.10-1.15 for condensor enlargers and 1.20-1.25 for diffusion light sources.

    This above is all Zone System parlance. There are other systems and tests to determine exposure but the explanation that I gave is more in line with the question that you posed.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin