Switch to English Language Passer en langue franšaise Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 68,712   Posts: 1,483,008   Online: 752
      
Results 1 to 3 of 3
  1. #1

    Join Date
    Nov 2009
    Location
    Switzerland
    Shooter
    Multi Format
    Posts
    223

    Jobo CPE2 and 2800 print drum

    Hi,

    Very simple question, i just got an lift to a CPE2, and I wounder if i can use the cog lid with a 2800 print drum, and use the lift while processing prints.

    I checked the Jobo homepage, but didn't find anything about fitting a cog wheel to the 2800 series.

    cheers

  2. #2

    Join Date
    Nov 2004
    Location
    Naestved, DK
    Shooter
    Multi Format
    Posts
    2,318
    Im not sure I understand your question but yes cog lids can be used with the 28000series drums. I you have a 2500 series drum with a cog lid just use that lid. the 2500 and 2800 series are, except for the funnel/cup and centerpost, the same.
    Best regards
    Send from my Electronic Data Management Device using TWOFingerTexting

    Technology distinquishable from magic is insufficiently developed

    S°ren Nielsen
    Denmark

  3. #3

    Join Date
    Nov 2009
    Location
    Switzerland
    Shooter
    Multi Format
    Posts
    223
    Hej Soeren

    That was my question, perfect, I tried the lib and it fitted but I wanted just to make sure
    (ilfochrome is to expensive to screw up...

    thanks



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  Ś   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin