Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 69,908   Posts: 1,521,520   Online: 879
      
Results 1 to 3 of 3
  1. #1

    Join Date
    Aug 2009
    Shooter
    Medium Format
    Posts
    1

    Constant Water Temperature

    Hello APUG,

    Lot's of great reading on this forum, so finally I should post something.

    I'm looking to keep my c41 chemicals (3x 2Ltr bottles) in a controlled constant water bath at 102F. I process negatives about 3 days within a week so I want to eliminate the time it takes to warm up my chemicals.
    First thing I thought of, that would be safe, is a rectangular fish tank with a water heater. I can't seem to find an aquarium water heater online that show the max limit of the heaters temperature.
    Does anyone have any luck with this or alternative solutions ?

    Thx!
    Mark W.
    http://www.flickr.com/photos/probe3/

  2. #2
    richard ide's Avatar
    Join Date
    Nov 2005
    Location
    Markham, Ontario
    Shooter
    Multi Format
    Posts
    1,214
    I would not keep your chemicals at an elevated temperature except when you are using them. They will deteriorate very rapidly.
    Richard

    Why are there no speaker jacks on a stereo camera?

  3. #3
    Mike Wilde's Avatar
    Join Date
    Aug 2006
    Location
    Misissauaga Canada
    Shooter
    Multi Format
    Posts
    2,939
    Images
    29
    Keep the water bath at elevated temp if you must, and pop the chems in a few hours before you need them.

    I have good luck using a typical 'cooler' or 'Esky' if your are oz/kiwi to hold my water bath.

    My setup has a fish tank pump to move water around, and a fish tank heater, that I have set at 100F and sealed up with 'duct seal' electrical conduit sealing compound. This goo keeps moisture out of the electrical part at the top of the glass heater tube. The insulated lid goes on the coolerr top and the power wires for the pump and heater keep it slightly ajar.

    I add a small quality of laundry grade chlorine bleach to keep algae at bay if I am going to run it for a few days continuosly.

    If I have added bleach, I will not use the tempering water as rinse water.

    Usually the cooler I use is a 'lunch box' sized one that allows me to warm 1L of dev, stop, bleach and fix for c-41 (yes, I home brew and split the blix into two steps). I slightly crack the bottle caps so the glass jars won't crack when the liquid and air inside the bottle expands , and then add tempering water at about 105F to the cooler. Heater and tank pump in, lid on, off for dinner, and by the time I have cleared the table and leaded the dishwasher the chems are all stable, up to temp, and ready to start processing.
    my real name, imagine that.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin