Switch to English Language Passer en langue franšaise Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,482   Posts: 1,571,163   Online: 1238
      
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 31
  1. #21
    ic-racer's Avatar
    Join Date
    Feb 2007
    Location
    Midwest USA
    Shooter
    Multi Format
    Posts
    6,348
    The old rubber base was quite difficult to remove:

  2. #22
    ic-racer's Avatar
    Join Date
    Feb 2007
    Location
    Midwest USA
    Shooter
    Multi Format
    Posts
    6,348
    I used a paint scrapper to remove all the old glue and rubber so that the surface was smooth.

  3. #23
    ic-racer's Avatar
    Join Date
    Feb 2007
    Location
    Midwest USA
    Shooter
    Multi Format
    Posts
    6,348
    Ready for the new foam rubber:

  4. #24
    ic-racer's Avatar
    Join Date
    Feb 2007
    Location
    Midwest USA
    Shooter
    Multi Format
    Posts
    6,348
    New foam rubber in place:

  5. #25
    ic-racer's Avatar
    Join Date
    Feb 2007
    Location
    Midwest USA
    Shooter
    Multi Format
    Posts
    6,348
    While the top heating part was out I took the opportunity to repaint it also. I used silver 'hammer-metal' finish paint. So here it is BEFORE and AFTER:


  6. #26

    Join Date
    Dec 2004
    Location
    San Francisco
    Shooter
    8x10 Format
    Posts
    1,099
    Images
    127
    OK, I was debating painting my ratty old 200. Having seen that photo I'm off to the hardware store. Thanks for the inspiration!

  7. #27

    Join Date
    Oct 2009
    Location
    Central Florida, USA
    Shooter
    Multi Format
    Posts
    4,012
    Where did you get the foam rubber? Mine is starting to go....
    Develop, stop, fix.... wait.... where's my film?

  8. #28
    ic-racer's Avatar
    Join Date
    Feb 2007
    Location
    Midwest USA
    Shooter
    Multi Format
    Posts
    6,348
    Quote Originally Posted by tkamiya View Post
    Where did you get the foam rubber? Mine is starting to go....
    I got it from B&H. I was putting it off for a while then remembered a few years ago how I was delaying my order on that Jobo 3005 drum and then poof its gone

  9. #29

    Join Date
    Jan 2008
    Location
    Hudson Valley, NY
    Shooter
    Large Format
    Posts
    96
    ic-racer inspired me to take a shot at restoring a Seal 200 Commercial that I bought on Craigslist. Here it is, still waiting on a new pad from B&H and some high temp wire to complete rewiring it.
    Click image for larger version. 

Name:	Seal 200 Commercial.jpg 
Views:	55 
Size:	236.4 KB 
ID:	61352
    Regards,
    Jim

  10. #30

    Join Date
    Apr 2010
    Location
    Hickory, NC
    Shooter
    4x5 Format
    Posts
    32
    Quote Originally Posted by ic-racer View Post
    While the top heating part was out I took the opportunity to repaint it also. I used silver 'hammer-metal' finish paint. So here it is BEFORE and AFTER:
    Congratulations. Very nice job.

Page 3 of 4 FirstFirst 1234 LastLast


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  Ś   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin