Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,826   Posts: 1,582,048   Online: 765
      
Results 1 to 5 of 5
  1. #1
    Henry Alive's Avatar
    Join Date
    Aug 2006
    Shooter
    Multi Format
    Posts
    190
    Images
    63

    The tool to square the blades in a 16x20 four blades Saunders Easel

    What tool do you use in order to align the blades in a 16x20 four blades Saunders Easel?
    The manual says that there are two hex screws on each actuator that permit squaring the blades. This is true. My problem is that I do not have the appropriate tool, and it is not a good idea to carry the easel to the tool store! I think it could be some kind of Allen Hex Key. Can you help me?
    Thanks,
    Henry.

  2. #2

    Join Date
    Feb 2008
    Location
    Winnipeg, Canada
    Shooter
    Multi Format
    Posts
    1,301
    Mine uses standard slotted screws for the blades, probably an older model than yours. The frame uses 1/8" allen head socket screws. The hex keys come is inexpensive sets available at almost any autoparts store.

  3. #3

    Join Date
    Apr 2004
    Location
    Montgomery, Il/USA
    Shooter
    Multi Format
    Posts
    5,300
    A set of allen keys is only going to be a couple of dollars. Get the fractional set & you'll be covered.
    Heavily sedated for your protection.

  4. #4
    Henry Alive's Avatar
    Join Date
    Aug 2006
    Shooter
    Multi Format
    Posts
    190
    Images
    63
    Ok. I will do it. Thanks,
    Henry.

  5. #5

    Join Date
    Sep 2002
    Location
    Oregon and Austria
    Shooter
    4x5 Format
    Posts
    883
    If all else fails, there's always the Rototrim...

    Doremus Scudder



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin