Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,910   Posts: 1,556,224   Online: 971
      
Results 1 to 8 of 8
  1. #1

    Join Date
    Mar 2011
    Shooter
    35mm
    Posts
    657

    Need overall dimensions of darkroom trays

    Can someone here give me the overall H. and W. of 16x20 and 20x24 darkroom trays? I'm probably going to get the Paterson 16x20s from Freestyle, if you have those and can measure one for me. I consider 20x24 prints the largest I will ever care to make in the future. If you have a tray for those I'd be grateful for its measurements as well. I'm sink sizing.

    Regards,

    sa

  2. #2
    RalphLambrecht's Avatar
    Join Date
    Sep 2003
    Location
    Central florida,USA
    Shooter
    Multi Format
    Posts
    6,618
    Images
    1
    19 1/2 by 23 1/4 inches, including the spout.
    Regards

    Ralph W. Lambrecht
    www.darkroomagic.comrorrlambrec@ymail.com[/URL]
    www.waybeyondmonochrome.com

  3. #3

    Join Date
    Mar 2011
    Shooter
    35mm
    Posts
    657
    Many thanks!

    sa

  4. #4
    David Brown's Avatar
    Join Date
    Feb 2004
    Location
    near Dallas, TX USA
    Shooter
    Medium Format
    Posts
    3,326
    Images
    7
    For allowing room in a sink, I'd estimate 4 inches in each direction. Mr. Lambrecht's actual measurements are just a tad under that.

  5. #5
    RalphLambrecht's Avatar
    Join Date
    Sep 2003
    Location
    Central florida,USA
    Shooter
    Multi Format
    Posts
    6,618
    Images
    1
    David

    I gave the outside dimension of the tray. To allow for room in the sink, one needs to add to what I reported, because I did not include any.
    Regards

    Ralph W. Lambrecht
    www.darkroomagic.comrorrlambrec@ymail.com[/URL]
    www.waybeyondmonochrome.com

  6. #6
    BetterSense's Avatar
    Join Date
    Aug 2008
    Location
    North Carolina
    Shooter
    35mm
    Posts
    2,876
    I made a thread like this a few weeks ago.

    http://www.apug.org/forums/forum43/8...x20-trays.html
    f/22 and be there.

  7. #7
    David Brown's Avatar
    Join Date
    Feb 2004
    Location
    near Dallas, TX USA
    Shooter
    Medium Format
    Posts
    3,326
    Images
    7
    Quote Originally Posted by RalphLambrecht View Post
    David

    I gave the outside dimension of the tray. To allow for room in the sink, one needs to add to what I reported, because I did not include any.
    Right. That's what I was trying to say, but did so poorly.

  8. #8
    wildbill's Avatar
    Join Date
    Nov 2004
    Location
    Grand Rapids
    Shooter
    Multi Format
    Posts
    2,453
    Images
    140
    I'd like the dimensions of the paterson 20x24's if anyone has 'em. I'm not into guessing, plywood and epoxy are expensive.
    www.vinnywalsh.com

    I know what I want but I just don't know how to go about gettin' it.-Hendrix



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin