Imossible SX70 film, problem?
Just received some of this film, loaded just fine but the first two pictures that I shot were, err, bloody awful. Kind of a pink mess, with a faint image just visible. I'm sure that my SX70 camera is ok, last time I used it anyway. Has anyone used this film? Were the results OK, or have I got some dud film?
That is actually Impossible not Imossible, just can't slpell!
let's face the truth about this film, what you have got as a result, that's it. it's still an experiment. it's most important to shield the photo from any light when it comes out of the camera for a minute or so. the better you shield the better the result. as I said before: but even well shielded it gives only a faint idea of a polaroid photo. it looks faded and blurry. it's even worse than expired polaroid originals. I'm very happy that I ordered only one pack. I see my purchase as contribution to the project and I will try the next flush again.
so I wish them good luck and let's hope for the best.
PX-100 is, er, very unpredictable. It's the weirdest film I've ever used in any camera.
Originally Posted by tony lockerbie
I've used several packs and found it well-nigh impossible to get consistent results. However, there are a few 'rules' to up your chance of getting something presentable. You need to cover from light asap, then you need to keep them dark for a while too. Temperature changes also affects the colour etc. Some people have reported fading of images over time - I've kept mine in a dark box and they've been ok so far.See hints here, and also look at the Flikr group for hints
I've posted a couple of my more successful shots in the APUG Polaroid/Impossible group. You have to remember though to expect quirks, mottling, strange exposures etc...
Hopefully subsequent versions of Silver Shade iron out some of these issue.
Hope this helps,
Last edited by coigach; 10-20-2010 at 04:39 AM. Click to view previous post history.
Thanks for the feedback Gavin and Reinhard. I will try again with the light shielding and see how that goes. At least my SX70 camera is still OK, hasn't been used in a while so I thought that something horrible had occurred to it.
I bought two packs of film, so I've made my contribution! Hope that they can sort it out, I do love the SX70's.
Sponsored Ad. (Subscribers to APUG have the option to remove this ad.)
Make a ligttight bag and connect it via Velcro tape to the eject flap and bottom of the camera.
Thanks AgX, I already have one in the process of being made.I tried another shot and rapidly placed the shot under my jacket, worked much better, unfortunately the pod leaked a little, so I have a bit of caustic on my shirt!
PX70 FF-Currently awful, (i heard they have another version, but are waiting for the old stuff to sell out) but fun to play around with. Not sensitive to temperature (especially the high side) but very sensitive to light. Cover it. Produces colors in full sun, a more monochromatic image in shade or shadow or cloud.
PX100-A very nice monochrome film. Minimal artifacts, sensitive to temperature and moderately to light. Turns sepia with over temperature. This has been corrected somewhat for the new PX600 film.
Once they correct their opacifier this will be much more fun to shoot.
The general idea- FF (first flush) means bad film, but selling it to get money. V01 (version, followed by number.) If it has solely the product name it is a more final version, though they seem to constantly improve.