I've got 16 rolls of Polavision movie film, the camera, and the processor/projector, and I intend to use said Polavision stock to shoot part of a film I've been writing. Given that there's probably no chance I'll ever be able to get Polavision film again, I'm making an attempt to establish as foolproof and concise an approach as possible in order to get any image at all whatsoever. So I have a couple questions about the stuff.
Since there's a good chance the integral developer has dried up, and assuming that this is the case, is there ANY way to develop the film once its been shot? I.e., can I acquire or mix chemistry and then somehow run the film through it? Is there a way to "revitalize" the chemicals if they have dried out?
Any thoughts on the subject would be greatly appreciated.
Wow, I'd really like to see the results. This is the screen-plate instant movie-film of Polaroid, right?
That being said, since it's basically a black&white emulsion, perhaps you can get away with normal chemicals. But, presumably that will produce negatives and not positives, unless of course it's a direct-positive emulsion which I don't think is the case.
If you can post pictures of the cans, the rolls, the processor, the projector, etc., that would be great. You have a very special collection... maybe the biggest in the universe!
I would recommend sacrificing a roll to figure out testing, using short strips and exposed in a still camera.
Is it super-8?
If you are the big tree, we are the small axe
it's 8mm. don't expect too much, there is a good overview of what was possible with correctly stored film 10 years ago. there are photos as well:
nevertheless please keep us updated.
Whoops, looks like I left out the part that said I have the opportunity to buy it. The guy selling it is asking 100, and I'm trying to talk him down a little. So it looks like at least some of the footage could turn out...good to know. If i end up purchasing the lot, I'll post the test roll up. One upside re. if something goes afoul with the processing is that you've only got to wait 90 seconds to know whether or not you need to reshoot the scene...
that closeup of the grain is gorgeous!
Sponsored Ad. (Subscribers to APUG have the option to remove this ad.)
It really is beautiful stuff. I've talked the guy down to 60 bucks if he doesn't sell it by this Monday... Keeping my fingers crossed. I had been looking for a film that I could shoot some interludes between sections of a film I've been writing for the longest time, and nothing I knew of had the right look to it. And as soon as I saw Polavision it was one of those, "Holy crap!" moments.
I shot one of the rolls today, and after placing it into the player with no effect, I rewound the cassette by hand in the dark. This revealed no image on the film whatsoever. So, deciding that cannibalizing this cassette in order to discern its inner workings was better than making many repeated mistakes, I took it apart. The chemistry had dried to a very gummy consistency, and I suspect that the integral developer is completely useless. So I cut a strip from the roll and ran it through a sort of improvised HC-110 monobath, figuring that if a very high ratio of HC-110 to fixer doesn't develop it, (I mean, the stuff at Dilution A processes Tr-X in about 5 minutes...) nothing would. The developent was for roughly two minutes, and the processed film has been nearly stripped of it's emulsion, which makes sense, Polavision being a positive format. When it is light out tomorrow, I plan to shoot a roll of test footage, clip it into many short lengths, and experiment (in a less haphazard and more scientific manner...) with processing times. If anyone has, or knows someone to ask questions regarding, information about the chemistry used in the cassettes, that would be most welcome.
I've included a scan of the positives that should illustrate the relative densities of the unprocessed and processed bits of film.
Awesome, I'm glad you got the stuff.
Have you been here? -> http://new55project.blogspot.com/ I believe that Bob Crowley is an active member here, and he might have some knowledge about the stuff.
Without a reversal developer, this stuff should produce a negative just like any b&w film; the positive image being a product of the processing scheme, not the emulsion.
If you are the big tree, we are the small axe
Yeah, after giving it some thought, clearly the change in the density of the emulsion is not per se evidence that the aforementioned approach is in any way a good idea if I want to get an image.
Holmburgers, thanks for the tip. I've just sent him an email asking for his input.
My current theory is that a dilute analogue of the original chemistry could be mixed, and the exposed film then loaded onto reels and souped in it, in a tank. I've done some hand-processing of Super-8, and still have the dingus that I built to wind the film onto.
An aside: When you hold the film stock up to a light and look through it, there's the most beautiful prismatic effect as the different layers separate the image into cyan, magenta, and yellow.
I received Bob's reply to my email today, and he said that the processing chemistry may be very similar to that used for the Polachrome 35mm instant slide film. Looking at the Land List website, it seems that Polachrome was descended from Polavision, one difference being that the negative layer was left on Polavision whereas it was removed from Polacrome. Apparently, the remnants of the negative layer were one of the reasons that gave Polavision its notorious murky quality. If by using a Polachrome-derived developing agent the footage is relieved of this attribute, it would actually end up being better for both the image and projection through a conventional Super-8 projector.
After about 5 minutes on the internet I located the MSDS sheet for Polachrome:
Sodium Hydroxide: 5-10%
Tetramethyl Reductic Acid: 7-13%
Sodium Sulfite Anhydrous: .50-1.50%
N-(N-Pentyl)-.Alpha.-Picolinium Bromide: 1-5%
So, if any forum members are well-versed in chemistry, and could advise a course of action re. mixing this (aside from, "Wear gloves!"), I'm prepared to venture down the dark path of obsession that leads to lost friends and hospitalization in order to get this to work...
Thanks in advance,