Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,972   Posts: 1,558,670   Online: 986
      
Results 1 to 2 of 2
  1. #1

    Join Date
    May 2008
    Shooter
    4x5 Format
    Posts
    26

    Sinar F2 -> C Conversion?

    I've managed to scrounge a P-series rear standard bearer and I have a P-series rear standard and ground glass... Everything looks great until I mount the bearer on the rail of my F2... With everything on the rear bearer zero'ed, it has the rear standard offset well to the right of the center of the rail and the front F2 standard and bearer (which are centered over the rail).

    First... is there a way to make this rear standard work on my F? And if so, what I'm I doing wrong? SOMETHING is clearly awry!!

    Thx,
    Brady
    Attached Thumbnails Attached Thumbnails DSCF6275.jpg  

  2. #2

    Join Date
    Jan 2006
    Shooter
    Multi Format
    Posts
    905
    wrong zero, that's an 8x10 rear standard, you need to use one of the other dots, can't remember which one, but it would be in the Sinar Manual.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin