Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,929   Posts: 1,585,235   Online: 845
      
Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13
  1. #11
    paul_c5x4's Avatar
    Join Date
    Apr 2009
    Location
    Ye Olde England
    Shooter
    Large Format
    Posts
    1,567
    Images
    26
    Measured the screws on a Seiko shutter and found it to be 0.85mm Dia by ~1.2mm long countersunk. In my little box of bits, I have one very similar screw, all be it in black (same thread, same length). Ping me an address and I'll pop it in the post to you.



    Note: The screws used on a Copal shutter are the same thread, but use a flat pan head.

  2. #12
    Rick A's Avatar
    Join Date
    Mar 2009
    Location
    north central Pa
    Shooter
    Multi Format
    Posts
    6,246
    Images
    34
    I don't have an extra of that screw.
    Rick A
    Argentum aevum

  3. #13
    paul_c5x4's Avatar
    Join Date
    Apr 2009
    Location
    Ye Olde England
    Shooter
    Large Format
    Posts
    1,567
    Images
    26
    Quote Originally Posted by Keenevision View Post
    So...... Out of the four screws posted, which one fitted in the hole ?

    One of the three smaller ones, or the single larger one ?

    Now that you have a replacement screw in place, I'd suggest a dab of nail varnish on the head so that you don't lose it again.
    Last edited by paul_c5x4; 08-23-2014 at 08:44 AM. Click to view previous post history.

Page 2 of 2 FirstFirst 12


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin