Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,685   Posts: 1,548,545   Online: 1106
      
Results 1 to 5 of 5
  1. #1

    Join Date
    Jan 2005
    Shooter
    35mm
    Posts
    109
    Images
    1

    ebony sw23 (i know its only kind of large format) w/ rb67 back

    i am buying an ebony sw23 and was wondering about their claim that mamiya rb67 backs work with this camera. I did not know that those backs were 2x3 international standard, thats pretty cool cause those backs seem to be well built and are cheap! I was wondering if anyone has done this and which back i should use, rb67, rb67pro, etc. Some research shows that the newer ones have some form of double exposure lock whicj i would not want since that must interface with the camera somehow. Do I want the regular rb67 back
    ? does anybody know? am i an idiot? should i just spend more to get the horseman back? I have not used one, all i know is that the mamiya ones ive used on actual RB's seem pretty good. I was also considering building a new back to fit linhof backs, I guess they are supposed to be the best but are they really much better? I mean as long as they hold the film flat and advance well. what else do you need?
    Thanks
    Ryan

  2. #2

    Join Date
    Mar 2005
    Shooter
    Multi Format
    Posts
    3,424
    Well, do you want to shoot nominal 6x7 or nominal 6x9?

  3. #3
    eclarke's Avatar
    Join Date
    Jun 2004
    Location
    New Berlin, Wi
    Shooter
    ULarge Format
    Posts
    1,955
    Images
    71
    I have a little Ebony 6x9 wide angle camera and use my RB back on it. Seems just fine...EC

  4. #4

    Join Date
    Nov 2005
    Location
    San Clemente, California
    Shooter
    Multi Format
    Posts
    1,101
    Quote Originally Posted by bicycletricycle
    ...which back i should use, rb67, rb67pro, etc. Some research shows that the newer ones have some form of double exposure lock whicj i would not want since that must interface with the camera somehow. Do I want the regular rb67 backRyan
    I once had a Galvin and used it with a newer RB67 back, the one with double-exposure interlock. It required that I take off the holder's plastic front plate (the part with locking rib) by removing approximately 8 small screws using a phillips-head jeweler's screwdriver, then use a straight-head jeweler's screwdriver to remove a small interlock pivoting lever and spring, finally replacing the front plate + retaining screws. It took longer to type this than to accomplish the modification. Save the lever and spring so they can be replaced if you ever need to use the holder with an RB67 or sell it to someone who wants to.

    Bottom line: get whichever back is most available to you. Either one will work.

  5. #5

    Join Date
    Jan 2005
    Shooter
    35mm
    Posts
    109
    Images
    1
    thanks for the information on the back modification. Also i know that if i want 6x9 a mamiya back would not do it.



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin