Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 68,692   Posts: 1,482,406   Online: 689
      
Results 1 to 3 of 3
  1. #1

    Join Date
    Dec 2004
    Location
    New Mexico
    Shooter
    Multi Format
    Posts
    98

    Sinar Hardware Question

    Do any of you happen to know the thread size used in the Sinar rail cap (part # 429.21)? It looks like 1/4"-20, but it is metric and I don't have the necessary doohickey to measure it.

    Thanks!

    Allen

  2. #2
    David H. Bebbington's Avatar
    Join Date
    Dec 2004
    Location
    East Kent, United Kingdom
    Shooter
    Medium Format
    Posts
    2,364
    Images
    36
    I don't have anything to measure with either, beyond a steel ruler, but a standard 5 mm bolt from my toolbox fits and the pitch seems to be 1 mm.

    Regards,

    David

  3. #3

    Join Date
    Dec 2004
    Location
    New Mexico
    Shooter
    Multi Format
    Posts
    98
    Quote Originally Posted by David H. Bebbington
    I don't have anything to measure with either, beyond a steel ruler, but a standard 5 mm bolt from my toolbox fits and the pitch seems to be 1 mm.
    Thanks David! I'll see if I can find a 5mm bolt over at my local home improvement center.

    Allen



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin