Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 71,847   Posts: 1,582,778   Online: 857
      
Results 1 to 2 of 2
  1. #1

    Join Date
    Sep 2002
    Posts
    1
    I recently acquired a Kodak Master View 8x10 with a modified lensboard and a Fujinon lens mounted in a Copal 1 shutter so I know I need to manufacture a lensboard with a 1 and 1/2 inch diameter hole. What I would like to know is what are the lensboard hole diameters needed for other shutters in case I would like to add a lens or two that would fit the lensboard that came with the camera. Thanks.

  2. #2
    David A. Goldfarb's Avatar
    Join Date
    Sep 2002
    Location
    Honolulu, Hawai'i
    Shooter
    Large Format
    Posts
    17,485
    Images
    20
    You can find info on most shutter diameters (Copal, Prontor, Ilex, Compur, etc.) at www.skgrimes.com.
    flickr--http://www.flickr.com/photos/davidagoldfarb/
    Photography (not as up to date as the flickr site)--http://www.davidagoldfarb.com/photo
    Academic (Slavic and Comparative Literature)--http://www.davidagoldfarb.com



 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin