Reloading sheet film in the field

[BrianPhotog]

So I just got my first LF in the post today (a Crown Graphic) along with a couple of filmholders.

Just a quick first question: If I want to change film in the filmholders in the field, where can I store the exposed sheets? Suggestions?

[Nick Zentena]

Spare film box but you need a dark place or a changing bag to unload.

[Jim Jones]

Old film holders are cheap. Reloading them in the field is a hassle. Unless you must travel lightly, have a day's worth of film already loaded.

[David A. Goldfarb]

Since the original title of the thread was "Changing Lensboards in the Field" (not something that usually requires much discussion), I've edited to reflect the question.

As the others have mentioned, the way to do this, if you must, is to use a changing tent or a dark place like a closet, if you have access to one and put the exposed film into an empty film box. Changing bags are an option, but a tent is less likely to transfer dust to the film.

[BBarlow690]

A changing bag can be less of a dust problem if you put things inside a clean plastic waste can bag first, and do your changing work as much as possible inside the plastic bag inside the changing bag.

I agree that it's much better to have enough holders. In the field you have better things to do than change holders. Like making pictures! Keep a sharp eye and take your time acquiring them cheap.

You can store your exposed film in the original film box underneath the packages of unexposed film. Use the little 4x5 cardboard pieces to pad and separate the used film. Useful until you have acquired enough empty film boxes.

[bennoj]

Perhaps not helpful when you're starting out, but my solution has been to use Quickloads and Grafmatic backs (I have accumulated 8) and therefore avoid the problem.

[Tom Hoskinson]

Since the original title of the thread was "Changing Lensboards in the Field" (not something that usually requires much discussion), I've edited to reflect the question.

As the others have mentioned, the way to do this, if you must, is to use a changing tent or a dark place like a closet, if you have access to one and put the exposed film into an empty film box. Changing bags are an option, but a tent is less likely to transfer dust to the film.

When I must load holders in the field, I use a tent. I avoid plastic bags because they are great static electricity generators, thus dust magnets.

[Ian Grant]

The colonies / new world have long fangled devious ways, back here in Europe, I just go into a pub, local bar and ask if I can use the cellar. Never had a problem, I sit in the dark and load and unload my darkslides.

Have to admit I've onlly been doing it for 20+ years, so expect problems.

Seriously explain what you need and 99% of times people will ablige

Ian

[BrianPhotog]

The colonies / new world have long fangled devious ways, back here in Europe, I just go into a pub, local bar and ask if I can use the cellar. Never had a problem, I sit in the dark and load and unload my darkslides.

Have to admit I've onlly been doing it for 20+ years, so expect problems.

Seriously explain what you need and 99% of times people will ablige

Ian

...and 1% of the time they'll think you're a nut job and call the cops

Thanks for the help guys. The reason I asked was because my Graflex only came with 2 filmholders. I've ordered a half dozen more, but they won't arrive in the post for a couple of weeks and I really wanted to practice my LF kung fu a little this weekend. A tent is a little much, especially since it's 4x5. If it were 8x10, sure...that's for the next time I can save up a little money

I think I'll bring a darkbag along and see how it goes.

[KenS]

Just a quick first question: If I want to change film in the filmholders in the field, where can I store the exposed sheets? Suggestions?

Brian,

Many moons ago, I built a changing box similar to the one that was marketed by Sinar but could not afford to buy. If you or anyone else would like some .jpgs of what I have (with measurements) I would be pleased to send them if contacted by e-mail (to 'all' and any) since my last attempts at uploading images from my old mac were somewhat of a disaster. I found the 'box', while being considerably less portable, at least made reloading on the trunk of the car an H***l of a lot easier than a changing bag. Just gimme a day or so to get .jpgs made and organised.

Ken