I'm working on a new measuring system called the 'Groove System'. Here's how it goes.
The base measurement is a groove. I figure a groove is a little side step in a funky dance and this might work out to about 20 inches. So 1 groove = 20 inches = 508mm. So one mini-groove would equal 15 inches and 381mm. See, the increases are based on a factor of 1.3333. Decrease go by a factor of 0.75. So a macro groove would equal 26 and 11/16" and 661mm and so on. You do the math.
The groove system. Write it down.



Adv Reply

Oops, eye of newt is the correct usage. Someone is bound to correct me anyhow.



