Switch to English Language Passer en langue française Omschakelen naar Nederlandse Taal Wechseln Sie zu deutschen Sprache Passa alla lingua italiana
Members: 70,338   Posts: 1,537,694   Online: 859
      
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11

    Join Date
    Jun 2004
    Shooter
    Medium Format
    Posts
    396
    You have already fixed it, but just a tip "for the records". The three holes are threaded so if you find a (or a couple of) fitting screw(s), screw them in and you will have something to "get hold of". That is better than to possibly ruin the threads of the flange holes by hammering with a punch in them.
    Just a thought...

    //Björn

  2. #12

    Join Date
    Jun 2005
    Location
    Troutdale, OR
    Shooter
    Medium Format
    Posts
    167
    Björn,

    Excellent suggestion. I did not look closely at the holes and assumed they were smooth inside.

    I'll drill a fourth hole opposite one of the existing ones and use the round-tipped spammer with it. While I don't anticipate this issue in the future, it may come up again and I'll keep your advice in mind.

    Many thanks,

    Rich

Page 2 of 2 FirstFirst 12


 

APUG PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Contact Us  |  Support Us!  |  Advertise  |  Site Terms  |  Archive  —   Search  |  Mobile Device Access  |  RSS  |  Facebook  |  Linkedin