Source for Barrel Lens Mounting Flanges?

[Jay Decker]

Have a couple old barrel lenses without mounting flanges. So, I'm looking for the sources for lens mounting flanges? I have the lens identfication data and thread outside diameter and thread pitch measurements. Just need to find someone with the right box of lens mounting flanges.

Thanks,

Jay

[domaz]

If the thread pitch is 0.75 you might be able to use standard step-up rings available on Ebay for very cheap. Just a thought.

[jnanian]

hi jay

in a pinch i have just screwed the barrel lens
right into the matboard i use as a lensboard.
sometimes friction mount it ( on the barrel not the thread )
with some black matt masking tape ( to make sure light doesn't make it through )

some of the lenses i have done this to have been mounted like
that for 6 years ... and i never had troubles ...
granted these are smaller barrel lenses, and single cells
nothing like a vitax ( bazooka ) or verito barrel ...

if you have smaller lenses the "in a pinch " method might work
until you find a mounting flange ..

good luck!

john

[MikeSeb]

SK Grimes does this kind of work. They may be willing to sell you the part or help you source it.